A Saudi Energy Company specialized in turnkey jobs in Substations and Transmission lines up to 380 KV, and has a factory certified in building protection, control and low voltage panels, looking for:
Senior Protection Design Manager: (Job Code:EN/02) Graduate in Electrical Engineer with at least 10 years experience in the field of Design of HV Substation of 5 years shall be as a Senior. Protection Design Engineer, shall eb conversant with applicable standards and codes.
Project Manager: (Job Code: EN/04) Graduate in Electrical Engineer with more than 10 years experience in Project Manager in Transmission Lines up to 380 KV.
Site Manager: (Job Code: EN/05) Graduate in electrical Engineering with more than 5 years of experience in construction of HV / LV Station / Transmission Lines of which at least 3 years shall be in the capacity of Engineer.
Design Manager: (Job Code: PR/06) Graduate in Mechanical Engineering with minimum 4-5 years experience in estimation of Fire protection systems like FM-200, CO2, Deluge, Sprinkler, Addressable and conventional Fire Alam, Foam, Fire hydrants, Fire Pumps etc. Must be familiar with NFPA codes and Middle east experience in preferred.
Installation Site Engineer: Job Code: EN/07) Graduate in Electrical / Mechanical Engineering with more than 10 years experience. in tower erection and stringing in Transmission Lines up to 380 KV.
Sr. Civil Engineer: Job Code: ENC/09) Graduate in Civil Engineer. with more than 5 years experience in the construction of HV /LV GIS Substations.
Surveying engineer: (Job Code: ENC/10) B.Sc , or Diploma Engineer/Surveying with more than 8 years experience Previous experience. in H/V electrical Overhead Lines up to 380 KV is a must Conversant with using modern survey instruments alnog with relevant computer software.
Contract Administrator: (Job Code: PD/11) B.Sc in any engineering disciplines, 10 years post graduation experience of which 5 years n a similar position contracting experience is a must, Familiarity with construction low and various forms of construction contracts, Good communication and negotiation skills, Fluent in spoken & written English, Arabic language knowledge is an advantage.
Sr. Tendering Engineer: (Job Code: TD/13) Graduate in Electrical Engineering with 5 to 8 years experience in tender preparation, analysis, clarification and awards stages, strong ca;abilities in managing tender, allocating of work load review and approval of subcontract and invitations for tender preparation.
QA/QC Engineer: Job Code: SHEQ/15) Graduate in electrical Engineer with at least 5 years in construction and substation / Transmission Lines, internal audit related to quality, safety & health and Environmental Systems, QA/QC works and good command in English.
Safety Officer: (Job Code: SHEQ/16) Gradate or Higher Diploma with courses in safety, minimum 3 years experience of HSE, dynamic, confident and willing to perform tasks on own initiative, knowledge of audit principle, good computer literature and good command in English.
Substation Electrical Engineer: (Job Code: EN/17) Bachelor in Electrical Engineering with Substation experience and overhead transmission lines, with a minimum experience of 5 years in protection and control of HV & MV switch gears.
Substation Electrical Technician: (Job Code: EN/18) Under Graduate or Diploma in Electrical Engineering with Substation experience and overhead transmission lines, with a minimum experience of 5 years in protection and control of HV & MV switch gears.
Fire Fighting Supervisor: (Job Code: AD/26) Diploma in Mechanical Engineer with 7 years of experience in installation, testing & commissioning of Fire Fighting Equipment, System.
Maintenence Supervisor: (Job Code: AD/27) Diploma in Mechanical Engineer with 7 years of experience in leading a team for maintenance of HVAC Equipment and System,.
Electrical Planning Engineer: (Job Code: EN/19) Graduate in Electrical or Economy Engineering with 6 to 10 years experience, to follow up and prepare project cost and cost analysis, control Project invoice plan.cost center of projects, Good English Command and computer knowledge with MS and Primavera.
Testing & Commissioning Engineer: (Job Code: GS/20) Graduate in Electrical Engineering with 4 to 20 years of experience in power trans. & Dist. Field, experience in testing of power cables CCT, all electrical test/HVAC test & in HV / LV substation operation and extensive knowledge of electrical control systems & commissioning of new electrical equipment, experience in troubleshooting & analysis of equipment performance, Ability to understand the system logic & explain its characteristic & functions, Undertakes commissioning activities to customer specification including completion of appropriation test documentation, Proficient handling of Primary & Secondary Injectiors of OMICRIN,FREJA,ISA, T & R SVERKER. etc.
Protection Engineer Electrical Control Engineer: (Job Code: EN/21) Graduate in electrical Engineer with minimum 5 years well experienced in the field of Analyzing schematic protection drawing , protection panel scheme checking, fault finding, clearing protection related punch lists, operation check of circuit breakers interlock checking etc. If experienced in relay testing it will be advantage.
HT Cable Jointer: (Job Code: EN/22) Should be minimum. ITI certificate and minimum 5 years experience in the HT cable jointing work, must have HT cable jointing license issued by any Electricity department or licensing board authorizing to make joint & termination for 11 -132 kV or more voltage level cable. Should have through knowledge for 1/core, 3/core HT cable for straight joint, terminations etc., (Muslim)
Supervisor Technician (Job Code: EN/23) Must be diploma in electrical engineering with not less than 10 years experience in the following fields, Transformer erection, GIS erection, control & relay panels erection, power and control cable laying, control cable termination etc., Should have through knowledge to read and fault finding of control circuits, schematics, pre-checking work. must be worked in 110kv and above voltage level substations.
Estimation Engineer: (Job Code: EN/24) Graduate in Mechanical Engineering with minimum 4-5 years experience in designing of fire protection systems like FM-00, CO2, Deluge, Sprinkler, Addressable and conventional Fire Alarm, Foam, Fire hydrants, Fire Pumps etc. Should have the experience of running the flow calculations for Fire suppression systems, Hydraulic flow calculations of Fire-Sprinkler systems and must abe familiar with NFPA codes Middle east experience is preferred.
HVAC Supervisor: (Job Code: AD/25) Diploma in Mechanical Engineer with 7 years experience . in installation, testing & commissioning of HVAC Equipment, System.
Finance Manager Accounts Manager: (Job Code: AC/001) Formulate strategies and optimize organizational liquidity for the Company. Can handle cash flow management, funding of payments through short/long term borrowing etc. Develop, implement and evaluate financial procedures and processes to facilitate effective decision making and the efficient use of financial resources. Develop productive relationships with auditors, bankers, and financial institutions. Prepare management & statutory requirements including monthly and annual financial statements. Reviews and approves payments such as reimbursements, payments on accounts, vouchers, checks, etc. Understanding of GAAP, ability to comprehend legal documents and adherence to accounting policies. Qualification: BS (Accounts) with ACA/CMA or equivalent and at least 10-15 years work experience as Finance / Accounts Manager.
Document Control Administrator: (Job Code: PD/12) Bachelor degree in any relevant discipline, preferably IT, 5 years of relevant experience, Good exposure to database applications in construction , Good experience in Contract Manager software (previous expedition) Good communication skills with fluent in English language.
Senior Accountant: (Job Code: AC/002) Ar. Accountants are required for Treasury, Accounts and Budget Department. with the experience of compiling financial information to prepare entries to accounts. He can handle cash flow management short term borrowing and financing charges, Prepare budget, revenue, expense, invoices, and other accounting documents Qualification: BS (Accounts), party qualified CMA, CA or equivalent with 5-10 years of experience.
Applicants may send their Cvs at:jobsindia@gmail.com (Job Title should be inserted in the subject line of the email)
Read more...
